Completed BSc diplomas topics
1. | Applications of conductive composite filaments in 3D printing |
Győry Tamás - 2022 |
2. | Investigation of the effect of a magnetisable additive on a polyethylene product |
Biró Dominik István - 2022 |
3. | Analysis of applicability of 3D printed injection mould inserts |
Lukács Norbert László - 2021 |
4. | Optimization of injection molded cover production parameters taking into account shape tolerance, dimensional tolerance and manufacturability |
Pass Bence - 2020 |
5. | Development of polymer based bipolar plates for fuel cells |
Rohoska Zita - 2020 |
6. | Development of injection molded all-polypropylene composites |
Kerekes Péter - 2020 |
7. | Compatibility of fillers with caprolactam |
Jandrics András - 2020 |
8. | Effect of the wollastonite on the properies of injection molded polyethylene terephthalate products |
Gál Vilmos Csaba - 2019 |
9. | Condition monitoring of direct 3D printed polymer injection molds |
Bácsi Barnabás - 2019 |
10. | Effect of the fillers on morphology and mechanical properties of PET |
Volom Balázs - 2019 |
11. | Characterication of surface properties of polyamide 6 samples prepared through in-situ polymerization |
Puskás Arnold - 2018 |
12. | Development and embedding of three dimensional conductive network |
Veszprémi Máté Roland - 2018 |
13. | The Examination of the welding properties of PP/TPE in two component injection molding |
Bereczki Ferenc - 2017 |
14. | Development of measurement system and method for determining the heat transfer coefficient between metal and polymer surface |
Richolm András - 2016 |
15. | Analysis of polyamide based boron nitride/carbon fiber reinforced thermally conductive hybrid polymer composites |
Dobszay András - 2016 |
16. | Adhesion between the components of a two-component injection molded part |
Ratinland Tamás - 2016 |
17. | In-situ dispersion of nano fillers in injection molding |
Takács Bence - 2016 |
18. | Development and optimization of special polymer filaments for fused deposition modeling technology |
Németh Kristóf - 2016 |
19. | The injection molding process capability and product quality characterisation at Anton Kft. |
Varga János - 2016 |
20. | Sampling and process optimization with design of experiment of an automotive box cover |
Rácz Tamás - 2016 |
21. | Töltött hővezető polimer kompozitok szilárdságnövelése szénszál alkalmazásával |
Petrény Roland - 2015 |
22. | Erővel záró fröccsöntött alkatrészek össze-, és szétszerelési erejének vizsgálata |
Bukovinszki Zoltán - 2015 |
23. | Többféle gócképző hibridhatásának vizsgálata lebontható polimerekben |
Nagy Ákos - 2014 |
24. | Kompozit trike tervezése hátimotoros siklóernyőhöz |
Farkas Viktor - 2014 |
25. | Fröccsöntött termékek homogenitási problémáinak javítása |
Heincz Norbert - 2014 |
26. | FDM technológiával gyártott termékek minősítése |
Boór Tamás - 2014 |
27. | Fröccsöntött termékek homogenitásának elemzése és javítása |
Szép Gergely - 2013 |
28. | Hővezető polimerek továbbfejlesztése a töltőanyagok tulajdonságmódosításával |
Győrvári Dávid - 2013 |
29. | Technológiai paraméterek hatása a fröccsöntött termékek színkeveredésére |
Török Dániel - 2012 |
30. | Alapanyag hatása a fröccsöntött termékek színkeveredésére |
Dudás Mihály - 2012 |
31. | Hibrid alapanyagú fröccsönthető hővezető polimer fejlesztése |
Kóczán Gábor - 2011 |
32. | Fröccsöntött polimerek vezetőképességének módosítása töltéssel |
Rangics Veronika - 2011 |
33. | Politejsav (PLA) mérettartásának fejlesztése nagy hőmérsékletű alkalmazásokhoz |
Fodor Kristóf - 2011 |